O9400R SDH/SONET ADM/TM

Model: O9400R

The Loop-O9400R STM-1/4/16 (OC-3/12/48) is a standards-compliant high density SDH/SONET ADM/TM with a full T1/E1 cross-connect rack system.

Data sheet


The Loop-O9400R STM-1/4/16 (OC-3/12/48) is a standards-compliant high density SDH/SONET ADM/TM with a full T1/E1 cross-connect rack system.

With up to 4 STM-1/4/16 (OC-3/12/48) aggregate interfaces on cross-connect modules and 16 STM-1 (OC-3) interfaces on tributaries, the Loop-O9400R offers the service provider a versatile protection scheme including SNCP (UPSR), and MSP (1+1) protection for network topology.

All interfaces are fully compliant with the relevant ETSI standards and ITU recommendations. The Loop-O9400R provides powerful Operation, Administration, Maintenance and Provisioning (OAM&P) functionality, including fault management, performance monitoring, configuration management, and network security management. Through a console port, LAN port, In-band E1, and DCC channel, OAM&P can be achieved both locally and remotely via SNMP or menu-driven interfaces.

The Loop-O9400R provides a complete set of operation interfaces that are consistent with the Telecommunication Management Network (TMN) concept (ITU Recommendation M.30, G.784) for SDH/SONET Network Element/Operations System (NE/OS), NE/NE, and NE/Craft communications. Users can easily operate the Loop-O9400R locally or remotely for centralized management.

The O9400R has full add and drop capability according to the figures below:

  • For the controller STM-1/4 (OC-3/12) aggregate cross connect module, up to

1 STM-4 tributary
8 STM-1 tributaries ­
18 E3/T3 tributaries ­
378 E1/T1 tributaries
48 10/100M Ethernet EoS tributaries
6 GbE EoS tributaries

  • For the controller STM-1/4/16 (OC-3/12/48) aggregate cross connect module, up to:

1 STM-16 tributaries ­
4 STM-4 tributaries ­
6 STM-1 tributaries ­
24 E3/T3 tributaries
504 E1/T1 tributaries ­
64 10/100M Ethernet EoS tributaries
8 GbE EoS tributaries
56 FOM tributaries ­
4 TDMoG tributaries

  • 6U height, full front access (ETSI) shelf support up to 2.5G Mbps backplane
  • Hot-swappable cross-connect modules, tributary modules and power modules
  • Temperature-controlled fan tray
  • Aggregate cross-connect modules (controller modules)
    • Up to STM-1/4/16 (OC-3/12/48) aggregate lines with software configuration (CC16)
    • Up to STM-1/4 (OC-3/12) aggregate lines with software configuration (CC4)
  • Tributary modules: 8 tributary slots
    • Two ports STM-1/4 (OC-3/12) module
    • Three ports E3/T3 module
    • 16/32/63 ports E1/T1 tributary module
    • 1 GbE and 8 FE tributary module with L2 switch
    • 1 GbE or 8 FE tributary module without L2 switch
    • 7 FOM tributary module
    • 4 GEoSDH with L2 switch tributary module
    • TDMoG tributary module
  • Power Modules
    • DC module (-36 to -72 Vdc)
    • AC/DC hybrid module (90 to 240 Vac; -36 to -72 Vdc)
    • Dual power (1+ 1) protection
  • Protection
    • Controller cross-connect unit (CC16) protection,
      • MSP (1+1), SNCP/UPSR Ring
    • Controller cross-connect unit (CC4) protection,
    • MSP (1+1), SNCP/UPSR
    • Tributary protection
  • E1/T1: Card, Port, Line
  • E3/T3: Line
  • B155/622: MSP, SNCP/UPSR
  • Ethernet
  • FOM: Line
  • 4GEoSDH: Card
  • TDMoG: Card
  • TM, ADM, and cross-connect
  • Full cross-connect at VC11/VC12/VC3/VC4 levels
  • External/Internal/Line timing source with SSM
  • Ethernet supports GFP, LAPS, VCAT, BCP, LCAS and non-LCAS
  • Ethernet Order Wire (EOW) using VoIP technology
  • Management
    • Console port, VT100 menu-driven
    • SNMP port: Both v1 and v3 supported
    • Telnet and SSH
    • Centralized management with Loop’s EMS/iNMS over DCC channel
    • Loop-iNET GUI Element Management System
    • TMN management (Loop-iNMS) with full FCAPS and end-to-end circuit management
  • RoHS compliant